2017 Honda CR-V Maintenance Schedule

2017 Honda CR-V maintenance at a glance

The 2017 Honda CR-V belongs to the 5th generation (2017-2022), built with 1.5L L15 turbo or 2.4L naturally aspirated, plus a hybrid from 2020. It takes 0W-20 full synthetic. Oil changes run 7,500 - 10,000 miles on the Maintenance Minder. This is the first model year of that generation, so it is the build most likely to carry early-production quirks and the most likely to have accumulated technical service bulletins.

What a 2017 model needs now

A 2017 Honda CR-V is 9 years old in 2026, which at an average 12,000 miles a year puts it around 108,000 miles - high mileage. Near 108,000 miles you are past spark plugs, likely on a second set of brakes, and into suspension bushings, hoses and the water pump. Repairs start to outnumber scheduled services, and a written history is what tells you whether an item is due or already done. On that mileage estimate it should already have had coolant flush, water pump inspection and PCV service at 100,000 miles, and the next milestone is 120,000 miles - spark plugs on most long-life applications - roughly 1 years away at average use.

Key intervals for the 5th generation

Known issues on the 2017 CR-V

The fault most worth knowing about on this generation is A/C condenser failures, a common complaint across Honda models of this era. Owners also report Fuel dilution of engine oil on the 1.5L turbo in cold climates, prompting a service campaign; and Infotainment complaints on earlier builds. None of these are certainties on any individual vehicle - they are the patterns worth checking for when you buy or when a symptom appears.

Track your 2017 Honda CR-V service history free with the ServiceSage maintenance tracker, or compare it against other model years on the Honda CR-V maintenance schedule hub.

2017 Honda CR-V maintenance schedule

IntervalService
Maintenance Minder Code AEngine oil change (0W-20 full synthetic), Reset the oil life monitor
Maintenance Minder Code BReplace engine oil and filter, Rotate tires, Inspect brakes and brake fluid, Inspect suspension, steering, driveshaft boots, exhaust, and fuel lines
Sub-code 1Rotate tires
Sub-code 2 (typically every 30,000 mi)Replace engine air filter, Replace dust and pollen (cabin) filter, Inspect drive belt
Sub-code 3 (typically every 30,000-60,000 mi)Replace transmission fluid (CVT HCF-2 on the 1.5T - do not skip, it prevents shudder; the hybrid e-CVT fluid is inspected)
Sub-code 4 (typically every 100,000 mi)Replace spark plugs, Inspect valve clearance, Inspect water pump (these engines are chain-driven, so there is no timing belt to replace)
Sub-code 5Replace engine coolant (Honda Long Life Type 2, blue)
Sub-code 6Replace rear differential fluid - all-wheel-drive trims only
Sub-code 7Replace brake fluid (DOT 3)

What is due at each mileage - 2017 Honda CR-V

The table above is indexed by service interval. This is the same schedule indexed by odometer reading, for when you know your mileage and want the list. If your odometer sits between these figures, work back to the last one you passed and catch up anything skipped.

OdometerService due
30,000 mi (48,000 km)Replace engine air filter, Replace dust and pollen (cabin) filter, Inspect drive belt.
60,000 mi (97,000 km)Same as the 30,000 mi service.
100,000 mi (161,000 km)Replace spark plugs, Inspect valve clearance, Inspect water pump (these engines are chain-driven, so there is no timing belt to replace).
120,000 mi (193,000 km)Same as the 30,000 mi service.
150,000 mi (241,000 km)Same as the 30,000 mi service.
200,000 mi (322,000 km)Same as the 100,000 mi service.

Honda schedules this vehicle by Maintenance Minder code rather than by odometer, so the mileages above are the typical points those codes appear - the car itself decides, based on how it has been driven.

2017 Honda CR-V oil life reset

Maintenance Minder reset (SEL/RESET knob)

  1. Ignition to ON/II, engine off.
  2. Press the SEL/RESET knob repeatedly to cycle the display until "Engine Oil Life %" or the Maintenance Minder code appears.
  3. Press and hold SEL/RESET for about 10 seconds, until the oil-life percentage and maintenance code(s) start blinking.
  4. To reset only the completed item, rotate the knob to highlight it first. To reset everything, press and hold SEL/RESET again for about 5 more seconds while it is blinking.
  5. The display stops blinking and resets to 100% - reset confirmed.