| Interval | Service | Details |
|---|---|---|
| Every 50 hours | Tire Pressure Check | Check tire air pressure every 50 hours. |
| Every 50 hours | Battery Clean and Check | Clean and check the battery every 50 hours. |
| Every 50 hours | Front Axle Oil Level Check | Check front axle oil level every 50 hours. |
| Every 50 hours | Machine Lubrication (Grease Fittings) | Lubricate the machine's grease fittings every 50 hours. |
| Every 200 hours | Engine Oil and Filter Change | Change engine oil and filter every 200 hours. Uses approximately 2.7 L (2.9 qt) of John Deere PLUS-50 or TORQ-GARD SUPREME, or an equivalent meeting API CH / ACEA E3 or higher. |
| Every 200 hours | Transmission Oil and Filter Change | Change transmission oil and filter every 200 hours (recurring service after the initial 50-hour change). Transmission holds approximately 12.3 L (13 qt) of Low Viscosity Hy-Gard (J20D). |
| Every 200 hours | Transmission Suction Screen and Magnets Clean | Clean the transmission suction screen and internal magnets every 200 hours. |
| Every 200 hours | Air Filter Elements Check/Service | Check and service air filter elements every 200 hours; on the 1025R, service when the restriction indicator turns red. |
| Every 200 hours | Radiator and Oil Cooler Fins Clean | Clean radiator and oil cooler fins every 200 hours. |
| Every 200 hours | Alternator Belt Inspect | Inspect the alternator belt every 200 hours. |
| Every 200 hours | Wheel Bolt Torque Check | Check wheel bolt torque every 200 hours. |
| Every 400 hours | Air Filter Elements Replace | Replace air filter elements every 400 hours. |
| Every 400 hours | Fuel Filters Replace | Replace fuel filters every 400 hours. |
| Every 600 hours | Coolant Freeze Point and Clarity Check | Check radiator coolant freeze point and clarity of coolant every 600 hours. |
| Every 600 hours | Engine Low Idle Speed Check | Check engine low idle speed every 600 hours. |
| Every 600 hours | Air Intake Hoses and Clamps Check | Check air intake, hoses, and clamps every 600 hours. |
| Every 600 hours | Front Axle Oil Change | Change front axle oil every 600 hours. |
| Every 600 hours | Brake Adjustment Check | Check brake adjustment every 600 hours. |
| Every 1,200 hours | Engine Valve Clearance Check | Check engine valve clearance every 1200 hours; the manual directs the owner to see a John Deere dealer for this service. |
Change the oil in the John Deere 1025R every 200 hours of run time. Because it is measured in engine hours, log the hour-meter reading rather than a date.
The John Deere 1025R is serviced on engine hours, not miles. Key intervals include Tire Pressure Check (every 50 hours), Battery Clean and Check (every 50 hours), Front Axle Oil Level Check (every 50 hours). Track the hour meter and service each item when its interval comes due.
The John Deere 1025R engine takes approximately 2.7 L (2.9 qt) of oil. Oil type: John Deere PLUS-50 or TORQ-GARD SUPREME preferred; if not available, other oil meeting API Service Classification CH or higher and ACEA Specification E3 or higher.
The John Deere 1025R schedule lists these services every 200 hours: Engine Oil and Filter Change; Transmission Oil and Filter Change; Transmission Suction Screen and Magnets Clean; Air Filter Elements Check/Service; Radiator and Oil Cooler Fins Clean; Alternator Belt Inspect; Wheel Bolt Torque Check. Log the hour-meter reading when each is done.
One-time initial service: change transmission oil and filter and clean the transmission suction screen after the first 50 hours only (break-in service).
By hours. Small engines and heavy equipment log run time on an hour meter, so their service intervals are hours-based. ServiceSage Auto tracks the John Deere 1025R by hours and reminds you when each service is due.