Genie GTH-636 Telehandler Maintenance Schedule

Genie GTH-636 Telehandler maintenance — the short answer

  • Oil: 15W-40 · 9.4 qt (9 L) including filter
  • Engine: Turbocharged diesel, Tier 4f
  • Tracked by: engine hours, not miles

Genie GTH-636 Telehandler maintenance schedule by engine hours

IntervalServiceDetails
Every 1,000 hoursAir FilterEvery 1000 hours: replace air filter cartridge; Quarterly: inspect engine air filter
Every 1,000 hoursFuel FilterEvery 1000 hours: replace fuel filter cartridge; every 1000 hours: replace fuel pre-filter
Every 1,000 hoursLubrication PointsEvery 8 hours or daily, whichever comes first: lubricate the boom. Every 1000 hours: king pin bearings and bushings - grease; trunnion bushings - grease; seals - grease (severe duty perform daily). Quarterly: lubricate the driveshaft; inspect and lubricate the sequencing chains.
Every 1,000 hoursTransmission/Hydrostatic FluidEvery 1000 hours: transmission oil and filter - replace; drop box (gearbox) - change oil
Every 1,000 hoursBattery InspectionQuarterly: battery inspection; Every 1000 hours: battery and cable connectors - check
Every 2,000 hoursHydraulic Fluid & FilterEvery 50 hours, one time: replace hydraulic filters; Every 2000 hours: test or replace hydraulic oil. Recommended hydraulic fluid: Chevron Rando HD Premium, ISO Grade 32, viscosity index maximum 200

Genie GTH-636 Telehandler specifications

  • Type: Telehandler
  • Engine: Turbocharged diesel, Tier 4f
  • Displacement: Deutz TD 2.9 L4
  • Oil type: 15W-40
  • Oil capacity: 9.4 qt (9 L) including filter

Genie GTH-636 Telehandler items without a fixed hour interval

  • Engine Oil & Filter: Oil: 15W-40 | Capacity: 9.4 qt (9 L) including filter (from the operator's manual specifications) - The interval shown is a general guideline; check the operator's manual for the Genie interval.

Frequently asked questions

What is the maintenance schedule for a Genie GTH-636 Telehandler?

The Genie GTH-636 Telehandler is serviced on engine hours, not miles. Key intervals include Air Filter (every 1,000 hours), Fuel Filter (every 1,000 hours), Lubrication Points (every 1,000 hours). Track the hour meter and service each item when its interval comes due.

Does the Genie GTH-636 Telehandler track maintenance by hours or miles?

By hours. Small engines and heavy equipment log run time on an hour meter, so their service intervals are hours-based. ServiceSage Auto tracks the Genie GTH-636 Telehandler by hours and reminds you when each service is due.