JLG 600S Maintenance Schedule

JLG 600S maintenance — the short answer

  • Oil: EO - Engine (crankcase) Oil. Gas: API SF, SH, SG class, MIL-2104. Diesel: API CC/CD class, MIL-2104B/MIL-2104C. · 11 qt (10.5 L) Deutz D2011L04; 8.45 qt (8 L) Deutz TD2.9L4; 4.5 qt (4.25 L) GM w/filter
  • Oil change interval: every 1,200 hours
  • Engine: Diesel or gasoline/LP configurations; OEM manual lists Deutz diesel and GM gasoline/LP variants
  • Tracked by: engine hours, not miles

JLG 600S maintenance schedule by engine hours

IntervalServiceDetails
Every 300 hoursAir FilterEvery 6 months or 300 hours of operation, or as indicated by the condition indicator
Every 600 hoursFuel FilterDeutz: every year or 600 hours; GM gasoline: every 6 months or 300 hours; GM propane: 3 months or 150 hours
Every 1,200 hoursEngine Oil & FilterOil: EO - Engine (crankcase) Oil. Gas: API SF, SH, SG class, MIL-2104. Diesel: API CC/CD class, MIL-2104B/MIL-2104C. | Capacity: 11 qt (10.5 L) Deutz D2011L04; 8.45 qt (8 L) Deutz TD2.9L4; 4.5 qt (4.25 L) GM w/filter - Deutz: every year or 1200 hours; Deutz TD2.9L4: every year or 600 hours; GM: 3 months or 150 hours
Every 1,200 hoursHydraulic Fluid & FilterHydraulic oil must have anti-wear qualities at least to API Service Classification GL-3 and sufficient chemical stability for mobile hydraulic system service. JLG recommends Mobilfluid 424 hydraulic oil (SAE viscosity index 152). For cold weather below 20 degF, JLG recommends Mobil DTE 13M. Hydraulic tank: change every 2 years or 1200 hours; return/charge filters: first 50 hours, then every 6 months or 300 hours or as indicated by condition indicator.
Every 1,200 hoursLubrication PointsSwing bearing: every 3 months or 150 hrs; wheel bearings (if equipped): every 2 years or 1200 hrs; swing drive hub: check every 3 months or 150 hrs, change every 2 years or 1200 hrs; wheel drive hub: check every 3 months or 150 hrs, change every 2 years or 1200 hrs; increase lubrication frequency for multi-shift or hostile environments.

JLG 600S specifications

  • Type: Boom Lift
  • Engine: Diesel or gasoline/LP configurations; OEM manual lists Deutz diesel and GM gasoline/LP variants
  • Displacement: Deutz D2011L04 / Deutz TD2.9L4 / GM (varies by configuration)
  • Oil type: EO - Engine (crankcase) Oil. Gas: API SF, SH, SG class, MIL-2104. Diesel: API CC/CD class, MIL-2104B/MIL-2104C.
  • Oil capacity: 11 qt (10.5 L) Deutz D2011L04; 8.45 qt (8 L) Deutz TD2.9L4; 4.5 qt (4.25 L) GM w/filter

JLG 600S items without a fixed hour interval

  • Battery Inspection: Table 2-3 lists Batteries for pre-delivery/frequent and annual inspection; battery cleaning and terminal anti-corrosion treatment are specified, but no simple hour interval is stated

Frequently asked questions

How often should I change the oil in a JLG 600S?

Change the oil in the JLG 600S every 1,200 hours of run time. Because it is measured in engine hours, log the hour-meter reading rather than a date.

What is the maintenance schedule for a JLG 600S?

The JLG 600S is serviced on engine hours, not miles. Key intervals include Air Filter (every 300 hours), Fuel Filter (every 600 hours), Engine Oil & Filter (every 1,200 hours). Track the hour meter and service each item when its interval comes due.

Does the JLG 600S track maintenance by hours or miles?

By hours. Small engines and heavy equipment log run time on an hour meter, so their service intervals are hours-based. ServiceSage Auto tracks the JLG 600S by hours and reminds you when each service is due.