| Interval | Service | Details |
|---|---|---|
| Every 100 hours | Air Filter | Clean every 100 hrs; replace every 1 year (or every 6 cleanings) |
| Every 100 hours | Battery Inspection | Check every 50 hrs; annually if used less than 100 hrs/year |
| Every 200 hours | Engine Oil & Filter | Oil: Above 25 degC: SAE30, 10W-30, or 15W-40; -10 degC to 25 degC: SAE20, 10W-30, or 15W-40; Below -10 degC: SAE10W-30 | Capacity: 6.3 qt. - Every 200 hrs |
| Every 400 hours | Fuel Filter | Clean every 100 hrs; replace every 400 hrs |
| Every 400 hours | Hydraulic Fluid & Filter | Transmission fluid: KUBOTA SUPER UDT-2 fluid; regular UDT also permitted; change every 400 hrs. Front axle case (4WD): KUBOTA SUPER UDT-2 fluid or SAE 80-90 gear oil. |
| Every 400 hours | Lubrication Points | Grease every 50 hrs. Grease points listed in manual: front wheel hub (2WD), knuckle shaft (2WD), front axle support (4WD), clutch pedal, brake pedal, pedal shaft, battery terminal, lift rod, tie-rod end (4WD). Front wheel hub (2WD) grease every 400 hrs. |
| Every 400 hours | Transmission/Hydrostatic Fluid | KUBOTA SUPER UDT-2 fluid; regular UDT also permitted; change every 400 hrs |
Change the oil in the Kubota L2501 every 200 hours of run time. Because it is measured in engine hours, log the hour-meter reading rather than a date.
The Kubota L2501 is serviced on engine hours, not miles. Key intervals include Air Filter (every 100 hours), Battery Inspection (every 100 hours), Engine Oil & Filter (every 200 hours). Track the hour meter and service each item when its interval comes due.
By hours. Small engines and heavy equipment log run time on an hour meter, so their service intervals are hours-based. ServiceSage Auto tracks the Kubota L2501 by hours and reminds you when each service is due.