Kubota KX040-4 Maintenance Schedule

Kubota KX040-4 maintenance — the short answer

  • Oil: API service classification CJ-4; SAE 10W-30 or SAE 15W-40 for all seasons, or SAE 30/SAE 20/SAE 10W by ambient temperature · 5.0 L (1.32 US gal) with engine oil filter
  • Oil change interval: every 500 hours
  • Engine: D1803-CR-TE4 (BH1/BH2), water-cooled 4-cycle diesel, 3 cylinder
  • Tracked by: engine hours, not miles

Kubota KX040-4 maintenance schedule by engine hours

IntervalServiceDetails
Every 50 hoursFuel Tank and Water Separator DrainDrain the fuel tank and check/drain the water separator of water and sediment.
Every 50 hoursBattery Condition CheckCheck the battery condition indicator; recharge if black, replace if white.
Every 50 hoursGreasing Swing Bearing TeethPump grease into the swing bearing teeth at each 90-degree position of the swing frame, approx. 50 g per position.
Every 200 hoursV-Belt Tension Check/AdjustCheck V-belt (fan belt) tension daily; adjust deflection to 7-9 mm every 200 hours.
Every 200 hoursRadiator Hoses and Clamps CheckCheck coolant hose connections and clamps for looseness or leaks, every 200 hours or every 6 months, whichever comes first.
Every 200 hoursAir Filter Outer Element CleanRemove and clean the outer air filter element; clean more often in dusty conditions and replace if very dirty. Registered emission-related part.
Every 200 hoursGreasing Swing Ball BearingGrease the swing ball bearing through the central nipple at each 90-degree position of the swing frame.
Every 200 hoursEvacuator Valve CleanOpen the evacuator valve to remove large particles of dust and dirt.
Every 200 hoursDPF Muffler CheckCheck that nothing flammable is deposited around the DPF muffler.
Every 200 hoursFuel Line and Intake Air Line CheckCheck that fuel and intake air line hoses and clamps are tight and undamaged.
Every 200 hoursAC Air Filter CleanOpen the cover and clean the air-conditioner air filter with compressed air from the opposite direction of normal air flow.
Every 200 hoursAC Condenser CleanCheck that the air-conditioner condenser is clean and free of debris.
Every 500 hoursEngine Oil ChangeChange the engine oil while warm and drain fully. Change is due every 500 hours, or every 1 year if service hours are less than 500.
Every 500 hoursEngine Oil Filter Cartridge ReplaceReplace the engine oil filter cartridge at the same time as the oil change, every 500 hours or every 1 year if service hours are less than 500.
Every 500 hoursFan Belt ReplaceReplace the fan belt if worn out, cracked, or torn.
Every 500 hoursFuel Filter Cartridge ReplaceReplace the fuel filter cartridge with the filter wrench and purge air from the fuel system afterward. Registered emission-related part.
Every 500 hoursDrive Unit Oil ChangeChange drive unit gear oil; first change after 50 hours as break-in service, then every 500 hours or at least once a year.
Every 1,000 hoursHydraulic Oil ChangeDrain and refill the hydraulic tank oil, including replacement of the suction filter in the hydraulic tank.
Every 1,000 hoursHydraulic Suction Filter Element ReplaceDetach and replace the suction filter in the hydraulic tank during the hydraulic oil change.
Every 1,000 hoursHydraulic Return Filter Element ReplaceTake the return filter out of the tank and replace it with a new one; also replace the breather filter under the cover at the same time.
Every 1,000 hoursHydraulic Pilot Filter Element ReplaceRemove the pilot filter case from the head cover and replace the element and O-ring.
Every 1,000 hoursAir Filter Outer Element ReplaceRemove and replace the outer air filter element with a new one. Registered emission-related part.
Every 1,000 hoursAir Filter Inner Element ReplaceReplace the inner air filter element; do not remove it during routine outer-element cleaning.
Every 1,000 hoursAC Air Filter ReplaceReplace the air-conditioner air filter if it is very dirty. Table lists no specific reference page for this measure.
Every 1,500 hoursInjector Tip CheckHave the injector tip checked by an authorized Kubota dealer.
Every 1,500 hoursOil Separator Element and O-Ring ReplaceReplace the oil separator element and O-ring; wipe oil and carbon from the case with a clean rag.
Every 1,500 hoursEGR Cooler CheckHave the EGR cooler checked by an authorized Kubota dealer.
Every 2,000 hoursAlternator and Starter Motor CheckContact your Kubota dealer to check the alternator and starter motor.
Every 3,000 hoursEGR System CheckHave the EGR system checked by an authorized Kubota dealer.
Every 3,000 hoursTurbocharger CheckHave the turbocharger checked by an authorized Kubota dealer.
Every 3,000 hoursDPF CleanHave the DPF cleaned by an authorized Kubota dealer using specialized equipment; do not attempt to disassemble, shake, or heat it.

Kubota KX040-4 specifications

  • Type: Mini Excavator
  • Engine: D1803-CR-TE4 (BH1/BH2), water-cooled 4-cycle diesel, 3 cylinder
  • Displacement: 1826 cc (111.4 cu in); rated engine power 30.1 kW (40.4 Hp) at 2200 rpm
  • Oil type: API service classification CJ-4; SAE 10W-30 or SAE 15W-40 for all seasons, or SAE 30/SAE 20/SAE 10W by ambient temperature
  • Oil capacity: 5.0 L (1.32 US gal) with engine oil filter

Kubota KX040-4 items without a fixed hour interval

  • Coolant Level Check: Check the coolant level in the recovery tank before each use; fill between the FULL and LOW marks if necessary.
  • Coolant Change: Drain and replace the radiator coolant.
  • Fuel Level Check: Check the fuel level with the fuel gauge before each use.
  • Engine Oil Level Check: Check the engine oil level with the dipstick before each use, five minutes after stopping the engine, on level ground.
  • Hydraulic Oil Level Check: Check the hydraulic oil level at the gauge before each use with the machine parked level and attachments lowered.
  • Grease Front Attachments: Grease the bucket/dozer link pins, cylinder bosses, and boom swing fulcrum through the marked grease nipples before each use.
  • Radiator and Oil Cooler Check: Check the radiator and oil cooler fins for dirt clogging before each use.
  • Washer Liquid Check: Keep the windshield washer liquid tank filled; running it dry can damage the motor.
  • Engine and Electrical Wiring Check: Check the electrical circuitry for disconnections, shorts, or loose terminals before each use.
  • Radiator Hoses and Clamps Replace: Replace radiator hoses and hose clamps; replace earlier if swollen, hard, or cracked.
  • Fuel Line and Intake Air Line Replace: Replace fuel and intake air line hoses and clamps only if necessary.
  • Exhaust Manifold Check: Have the exhaust manifold checked for cracks, gas leakage, and mounting screw tightness by an authorized Kubota dealer.
  • Intake Air Line for Air Leaks Check: Have the intake air line checked for air leaks by an authorized Kubota dealer.
  • Boost Sensor and AFS Check: Have the boost sensor and air flow sensor checked by an authorized Kubota dealer.
  • DPF Muffler Condition Check: Have the condition of the DPF muffler checked by an authorized Kubota dealer.
  • DPF Differential Pressure Pipes and Hoses Check: Have the DPF differential pressure pipes and hoses checked by an authorized Kubota dealer.
  • DPF Exhaust Gas Temperature Sensor Check: Have the DPF exhaust gas temperature sensor checked by an authorized Kubota dealer.
  • EGR Piping for Gas Leak Check: Have EGR piping checked for gas leaks by an authorized Kubota dealer.
  • Radiator System Rinse: Rinse the radiator system.
  • Oil Separator Rubber Hose Replace: Have the oil separator rubber hose replaced by an authorized Kubota dealer.
  • DPF Differential Pressure Sensor Rubber Piping Replace: Have the DPF differential pressure sensor rubber piping (front and back) replaced by an authorized Kubota dealer.
  • Suction Pipe Downstream the AFS Replace: Have the suction pipe downstream of the air flow sensor replaced by an authorized Kubota dealer.
  • Boost Sensor Pressure Rubber Piping Replace: Have the boost sensor pressure rubber piping replaced by an authorized Kubota dealer.
  • EGR Cooler Hose Replace: Have the EGR cooler hose replaced by an authorized Kubota dealer.
  • AC Pipes and Hoses Check: Check that air-conditioner lines and hose clamps are tight and undamaged.
  • AC Pipes and Hoses Replace: Replace air-conditioner pipes and hoses if swollen, hard, or cracked; consult your Kubota dealer.
  • AC Refrigerant Amount Check: Check the amount of R134a refrigerant via the sight glass; ask your dealer to inspect and charge if extremely low.

Frequently asked questions

How often should I change the oil in a Kubota KX040-4?

Change the oil in the Kubota KX040-4 every 500 hours of run time. Because it is measured in engine hours, log the hour-meter reading rather than a date.

What is the maintenance schedule for a Kubota KX040-4?

The Kubota KX040-4 is serviced on engine hours, not miles. Key intervals include Fuel Tank and Water Separator Drain (every 50 hours), Battery Condition Check (every 50 hours), Greasing Swing Bearing Teeth (every 50 hours). Track the hour meter and service each item when its interval comes due.

Does the Kubota KX040-4 track maintenance by hours or miles?

By hours. Small engines and heavy equipment log run time on an hour meter, so their service intervals are hours-based. ServiceSage Auto tracks the Kubota KX040-4 by hours and reminds you when each service is due.