| Interval | Service | Details |
|---|---|---|
| Every 50 hours | Track Tension | Check and adjust after first 8 hours, after first 50 hours, every 50 hours, and yearly or before storage; clean tracks before each use or daily |
| Every 50 hours | Battery Inspection | Check battery condition every 50 hours |
| Every 200 hours | Engine Oil & Filter | Oil: Detergent diesel engine oil (API service CH-4 or higher) | Capacity: 5.7 L (1.5 US gallons) with filter - Every 100 hours; first change after 50 hours (engine oil and filter); oil filter every 200 hours |
| Every 400 hours | Fuel Filter | Drain water and contaminants before each use or daily; replace fuel filter canister and in-line filter every 400 hours; drain and clean fuel tank every 2 years |
| Every 400 hours | Hydraulic Fluid & Filter | Hydraulic tank capacity 37.9 L (10 US gallons); change hydraulic fluid every 400 hours; replace hydraulic filter after first 8 hours and every 200 hours |
| Every 500 hours | Air Filter | Inspect before each use or daily; clean debris every 25 hours; replace air filter every 500 hours or when service indicator shows red |
Change the oil in the Toro TX 1000 Compact Utility Loader every 200 hours of run time. Because it is measured in engine hours, log the hour-meter reading rather than a date.
The Toro TX 1000 Compact Utility Loader is serviced on engine hours, not miles. Key intervals include Track Tension (every 50 hours), Battery Inspection (every 50 hours), Engine Oil & Filter (every 200 hours). Track the hour meter and service each item when its interval comes due.
By hours. Small engines and heavy equipment log run time on an hour meter, so their service intervals are hours-based. ServiceSage Auto tracks the Toro TX 1000 Compact Utility Loader by hours and reminds you when each service is due.