| Interval | Service | Details |
|---|---|---|
| Every 10 hours | Track Tension | Check tension and adjust as needed. Source: Bobcat OEM service schedule (SS MEX E35 iT4-B3GR-EN.pdf). |
| Every 50 hours | Battery Inspection | Check cables, connections, and electrolyte level; add distilled water as needed. Source: Bobcat OEM service schedule (SS MEX E35 iT4-B3GR-EN.pdf). |
| Every 250 hours | Fuel Filter | Replace filter. Break-in service at first 50 hours; the recurring interval is every 250 hours or 12 months, whichever comes first. Source: Bobcat OEM service schedule (SS MEX E35 iT4-B3GR-EN.pdf). |
| Every 500 hours | Engine Oil & Filter | Replace oil and filter. Break-in service at first 50 hours; the recurring interval is every 500 hours or 12 months, whichever comes first. Source: Bobcat OEM service schedule (SS MEX E35 iT4-B3GR-EN.pdf). |
| Every 500 hours | Hydraulic Filter | Replace the hydraulic filter, pilot filter and the reservoir breather cap. Every 500 hours or 12 months, whichever comes first. Source: Bobcat OEM service schedule (SS MEX E35 iT4-B3GR-EN.pdf). |
| Every 1,000 hours | Hydraulic Fluid & Filter | Replace hydraulic fluid and filters. Every 1000 hours or 12 months, whichever comes first. Source: Bobcat OEM service schedule (SS MEX E35 iT4-B3GR-EN.pdf). |
Change the oil in the Bobcat E35 every 500 hours of run time. Because it is measured in engine hours, log the hour-meter reading rather than a date.
The Bobcat E35 is serviced on engine hours, not miles. Key intervals include Track Tension (every 10 hours), Battery Inspection (every 50 hours), Fuel Filter (every 250 hours). Track the hour meter and service each item when its interval comes due.
By hours. Small engines and heavy equipment log run time on an hour meter, so their service intervals are hours-based. ServiceSage Auto tracks the Bobcat E35 by hours and reminds you when each service is due.