| Interval | Service | Details |
|---|---|---|
| Every 50 hours | Engine Oil & Filter | Oil: SAE 10W-30 | Capacity: 1.16 US qt (1.1 L) - Before each use: check engine oil; after first 25 hours or first month: change engine oil; after 50 hours or every 6 months: change engine oil |
| Every 100 hours | Fuel Filter | After 100 hours or every 6 months: replace fuel filter |
| Every 100 hours | Battery Inspection | After 100 hours or every 6 months: battery maintenance listed in schedule; no separate interval stated |
| Every 300 hours | Air Filter | After 50 hours or every 6 months: clean air filter; after 300 hours or every year: replace air filter |
| Every 300 hours | Spark Plug | Plug: 91708 (F7TC), gap 0.024 - 0.032 in (0.60 - 0.80 mm) - After 100 hours or every 6 months: inspect/clean; after 300 hours or every year: replace |
The Westinghouse WGen9500DF takes its first engine oil and filter change at 50 hours as a break-in service. The recurring interval after that is set by the operation and maintenance manual for your serial number and is not stated in the sources we were able to verify - check your manual before assuming it is also 50 hours, because on machines in this class the recurring interval is typically far longer. Either way it is measured in engine hours, so log the hour meter rather than a date.
The Westinghouse WGen9500DF is serviced on engine hours, not miles. Key intervals include Engine Oil & Filter (every 50 hours), Fuel Filter (every 100 hours), Battery Inspection (every 100 hours). Track the hour meter and service each item when its interval comes due.
By hours. Small engines and heavy equipment log run time on an hour meter, so their service intervals are hours-based. ServiceSage Auto tracks the Westinghouse WGen9500DF by hours and reminds you when each service is due.