Kohler KT715 Maintenance Schedule

Kohler KT715 maintenance — the short answer

  • Oil: All-season KOHLER PRO 10W-50 Synthetic Oil is Kohler's ideal oil and the only one that authorizes the 300-hour interval (with a KOHLER PRO Extended Life Oil Filter). Alternative oils are permitted but require 100-hour intervals; API service class SJ or higher, 5W-30 / 10W-30 / SAE 30 by air temperature · 1.9 L (2.0 U.S. qt.)
  • Oil change interval: every 100 hours
  • Engine: 7000 Series V-twin, 4-stroke OHV gasoline engine
  • Tracked by: engine hours, not miles

Kohler KT715 maintenance schedule by engine hours

IntervalServiceDetails
Every 25 hoursAir FilterEvery 25 hours: service/replace the precleaner, or replace the low-profile (LPAC) element if no precleaner is fitted. With a precleaner fitted: LPAC element every 50 hours, high-performance element every 75 hours, PRO performance element every 100 hours. Service more often under severe, dusty or dirty conditions.
Every 100 hoursEngine Oil & FilterEvery 100 hours. Kohler authorizes a 300 hour interval ONLY when using both KOHLER PRO 10W-50 Synthetic Oil and a KOHLER PRO Extended Life Oil Filter; with any other oil or filter the interval is 100 hours. Oil must be API service class SJ or higher - 5W-30, 10W-30, SAE 30 or PRO 10W-50 by air temperature. Capacity 1.9 L (2.0 U.S. qt). Change more often under severe, dusty or dirty conditions.
Every 100 hoursFuel FilterReplace every 100 hours. Kohler also lists a 100 hour check that all fasteners are in place and components are properly secured.
Every 100 hoursCooling SystemEvery 100 hours: remove the cooling shrouds and clean the cooling areas. Do this more often under severe, dusty or dirty conditions - a blocked cooling fin area is the usual cause of an air-cooled engine running hot.
Every 500 hoursValve ClearanceHave the valve lash checked and adjusted every 500 hours. Kohler marks this as a job for an authorized dealer.
Every 500 hoursSpark PlugReplace the spark plugs and set the gap every 500 hours. Gap 0.030 in. (0.76 mm). The KT715 maintenance kit lists spark plugs 25 132 23 (two required) and oil filter 52 050 02. Torque the plug to 20 ft-lb (27 N-m).

Kohler KT715 specifications

  • Type: Engine
  • Engine: 7000 Series V-twin, 4-stroke OHV gasoline engine
  • Displacement: 725 cc (44.2 cu. in.)
  • Oil type: All-season KOHLER PRO 10W-50 Synthetic Oil is Kohler's ideal oil and the only one that authorizes the 300-hour interval (with a KOHLER PRO Extended Life Oil Filter). Alternative oils are permitted but require 100-hour intervals; API service class SJ or higher, 5W-30 / 10W-30 / SAE 30 by air temperature
  • Oil capacity: 1.9 L (2.0 U.S. qt.)

Kohler KT715 items without a fixed hour interval

  • Storage Preparation: Out of service 2 months or more: add Kohler PRO Series fuel treatment and run the engine 2-3 minutes to get stabilized fuel through the fuel system, change the oil while the engine is still warm (not required if using KOHLER PRO 10W-50 full synthetic), pour about 1 oz of engine oil into each cylinder through the spark plug hole and crank slowly to distribute it, disconnect the negative battery cable, and store in a clean dry place. Do not use gasoline older than 30 days; E15, E20 and E85 are not approved.

Frequently asked questions

How often should I change the oil in a Kohler KT715?

Change the oil in the Kohler KT715 every 100 hours of run time. Because it is measured in engine hours, log the hour-meter reading rather than a date.

What is the maintenance schedule for a Kohler KT715?

The Kohler KT715 is serviced on engine hours, not miles. Key intervals include Air Filter (every 25 hours), Engine Oil & Filter (every 100 hours), Fuel Filter (every 100 hours). Track the hour meter and service each item when its interval comes due.

Does the Kohler KT715 track maintenance by hours or miles?

By hours. Small engines and heavy equipment log run time on an hour meter, so their service intervals are hours-based. ServiceSage Auto tracks the Kohler KT715 by hours and reminds you when each service is due.