When to Winterize Your Boat, by ZIP Code

Mercury Marine's rule for outboards: once the temperature stays below 50F, it is time to winterize, and the job should be done before the first hard freeze. Water left in the engine or the gearcase can freeze, expand and crack them.

Enter your ZIP code to see when those two things have happened in your area, from ten winters of NOAA temperature records. It is a regional estimate, not a forecast.

The ZIP check on this page takes a 5-digit ZIP code and returns the dates for your area.

When should you winterize your boat? (NOAA dates by ZIP code)
When to winterize, by city - 49 seconds: Mercury Marine's 50 F rule, and the earliest hard freeze in ten winters of NOAA data for Minneapolis, Detroit, Chicago and Tampa.

When to winterize in 13 US cities

The same numbers the ZIP check gives, for the ZIP prefix of each city's center. These are regional estimates from ten past winters, not a forecast. Where a city shows "Do not wait for it", a hard freeze has come before the usual cool-down: plan winterization before the early-freeze date.

CityUsual cool-down (below 50F)Historical early-freeze dateTypical first hard freezeLast spring freeze
Minneapolis, MNOct 14Oct 18Oct 28Apr 21
Detroit, MIOct 19Oct 31Nov 10Apr 22
Chicago, ILOct 28Nov 1Nov 20Apr 2
Boston, MADo not wait for itOct 31Nov 15Apr 3
Denver, CODo not wait for itOct 10Oct 28Apr 24
New York, NYNov 7Nov 11Nov 29Mar 30
St. Louis, MOOct 30Nov 1Nov 13Apr 8
Seattle, WANov 4Nov 29Dec 17Mar 6
Nashville, TNDo not wait for itNov 1Nov 20Apr 2
Atlanta, GADo not wait for itNov 13Dec 10Mar 7
Dallas, TXDo not wait for itNov 12Dec 23Feb 19
Houston, TXDec 12Dec 23Jan 16Feb 6
Tampa, FLrarelyrare (1 of 10 winters)--

The winterizing checklist

Your engine's owner's manual has the exact steps, products and amounts for your model. These are the common ones.

Steps differ by engine. Choose yours to see only the steps that apply.

Outboard

  1. Treat the fuel (Outboards and sterndrives). Add a marine fuel stabilizer to fresh fuel and run the engine for 10 to 15 minutes so the treated fuel reaches the whole system. On an older boat with a vented tank, fill it to about 95% to keep condensation out. Then replace the fuel filter.
  2. Change the oil and filter (Four-stroke outboards and sterndrives). Every 100 hours or once a season, however few hours the engine ran. Old oil holds moisture and acids that corrode the engine while it sits.
  3. Fog the engine (Four-stroke and two-stroke outboards). Spray fogging oil into each cylinder through the spark plug holes, ideally while the engine is still warm, to keep rust off the cylinders. Direct-injected two-strokes (such as OptiMax) take an ounce of DFI oil per cylinder instead.
  4. Change the gear lube (Outboard lower units and sterndrives). Every 100 hours or once a season. Look at the old lube as it drains: white or creamy lube means water got in, and water left in the gearcase can freeze and crack it.
  5. Get the water out of the engine (Outboards). Flush with fresh water, then tilt the motor all the way down so trapped water drains. Water left in the cooling system can freeze, expand and crack parts.
  6. Take care of the battery (Any boat). Disconnect it, store it somewhere cool and dry, and keep it on a smart maintainer so it does not run flat over the winter.
  7. Cover it (Any boat). Use a breathable cover or shrink-wrap to keep out snow, dirt, rodents and moisture, and check it now and then through the winter.

Sterndrive

  1. Treat the fuel (Outboards and sterndrives). Add a marine fuel stabilizer to the fuel and replace the water-separating fuel filter. Your owner's manual has the amount of stabilizer and the fuel treatment mix for your engine.
  2. Change the oil and filter (Four-stroke outboards and sterndrives). Change the engine oil and the oil filter before the boat is stored. Your owner's manual has the oil, the amount and the service interval for your engine.
  3. Change the gear lube (Outboard lower units and sterndrives). Change the gear lube in the drive and check the old lube for water as it drains. Your owner's manual has the lube, the amount and the service interval for your drive.
  4. Drain the cooling system and add antifreeze (Sterndrives (MerCruiser and similar)). Drain the seawater cooling system, then fill it with propylene glycol antifreeze mixed to protect to the lowest temperature the boat will see. Store the boat with the drive tilted down.
  5. Take care of the battery (Any boat). Disconnect it, store it somewhere cool and dry, and keep it on a smart maintainer so it does not run flat over the winter.
  6. Cover it (Any boat). Use a breathable cover or shrink-wrap to keep out snow, dirt, rodents and moisture, and check it now and then through the winter.

On a MerCruiser, follow your owner's manual for the fuel treatment mix, the engine oil and the drive lube.

Other (inboard, jet, PWC)

We have no manufacturer-sourced procedure for inboards, jet drives or personal watercraft. Follow your owner's manual for the engine. The steps below are not engine-specific.

  1. Take care of the battery (Any boat). Disconnect it, store it somewhere cool and dry, and keep it on a smart maintainer so it does not run flat over the winter.
  2. Cover it (Any boat). Use a breathable cover or shrink-wrap to keep out snow, dirt, rodents and moisture, and check it now and then through the winter.

What you'll need

Supplies named in Mercury's winterizing guides, by step. Each link opens an Amazon search, not one product, so you can pick what fits your engine.

Engine oil, oil and fuel filters and spark plugs depend on your engine: take the part numbers from your owner's manual.

Affiliate Disclosure: ServiceSage Auto participates in the Amazon Services LLC Associates Program. We earn a small commission from qualifying purchases at no extra cost to you. This helps us keep our content free and up-to-date.

How we work out the dates

The data. NOAA's daily minimum and average temperatures for the 10 winters from July 2015 to June 2025, at one point per 3-digit ZIP prefix: the middle of the Census Bureau's ZIP code areas under it, on the PRISM temperature grid. Alaska, Hawaii, Puerto Rico and the Virgin Islands use one airport weather station per prefix.

Start. Mercury says to winterize once the temperature consistently dips below 50F. We read that as the first day from August on when the average temperature of the past seven days is below 50F, and show the middle date of the winters.

Historical early-freeze date. Mercury says to finish before the first hard freeze, and the National Weather Service calls 28F a hard freeze. We show the earliest night that reached 28F in the 10 winters. It is a historical date, not a deadline that guarantees protection: have the boat winterized before it, and sooner if a hard freeze is forecast. The typical first hard freeze is the middle date.

What it cannot know. This is a regional estimate. A ZIP prefix covers a wide area: big lakes and the coast stay warmer into fall, and valleys and high ground freeze sooner. It also cannot see this year's weather. Watch your local forecast as the date gets close.

Frequently asked questions

When should I winterize my boat?

Mercury Marine says to start once the temperature stays below 50F and to finish before the first hard freeze. In Minneapolis the weather usually stays below 50F from around Oct 14, and the earliest hard freeze in the last 10 winters came on Oct 18. Enter your ZIP code above for a regional estimate, and watch your local forecast.

What temperature is a hard freeze?

The National Weather Service calls 28F or lower a hard freeze. This page counts a winter's first night that reaches 28F as its first hard freeze.

Why does freezing damage a boat engine?

Water expands when it freezes. Mercury warns that water left in an outboard's cooling system can freeze and crack parts, and that water in the gear lube can freeze and crack the gearcase. That is why winterizing drains the engine and changes the gear lube.

Do I need to winterize a boat in Florida or the South?

Freeze damage is unlikely where winters stay above freezing. A boat laid up for months still needs the storage steps (treated fuel, fresh oil, fogging, gear lube), and Mercury says the end of the season is a good time for the yearly service even in mild climates.

How often should outboard oil and gear lube be changed?

Mercury says every 100 hours or once a season, whichever comes first, for a four-stroke's oil and filter and for the lower unit's gear lube. Check your owner's manual for your model.

When is it safe to put the boat back in service in spring?

Once freezing nights are over. The ZIP check shows the typical last freezing night of spring and the latest one in the last 10 winters (Minneapolis: typically Apr 21, latest May 9). Check your local forecast first.

Sources