Jeep Wrangler Maintenance Schedule

Every Jeep Wrangler model year from 2015 to 2026, with the factory service intervals for each one. Pick your year below for the full schedule, the fluid specifications, and what each service costs.

Find your Wrangler by year

JK and JL service differently, and the JL splits again by engine.

2015-2017

JK: 3.6L Pentastar with the five-speed 545RFE automatic or a manual.

2018-2020

JL: ZF eight-speed (Jeep calls the fluid lifetime fill), 2.0L turbo from 2018, EcoDiesel from 2020.

2021-2026

The 4xe plug-in hybrid joins, and the Rubicon 392 V8 runs a 6,000-mile oil interval.

Two generations, five powertrains

The JK generation (2007-2018; our 2015-2017 pages, plus the JK sold alongside the new JL in 2018) is one powertrain: the 3.6L Pentastar V6 with a five-speed automatic (the 545RFE) or a six-speed manual. The JL (2018 on) is a different truck to service. The 3.6L V6 carried over, with the ZF eight-speed automatic or a six-speed manual, and the line-up grew: a 2.0L turbocharged four from 2018, a 3.0L EcoDiesel V6 for 2020 through 2023, the 4xe plug-in hybrid from 2021, and the 6.4L Hemi 392 V8 on the Rubicon 392.

Oil follows the engine. The 3.6L takes 5W-20 full synthetic; the 2.0L turbo and the 4xe take 0W-20; the EcoDiesel takes 5W-40; the 392 takes 0W-40. Our year pages carry Jeep's intervals as 10,000 miles or 12 months on the 3.6L and the 2.0L, 8,000 miles on the EcoDiesel, and 6,000 miles on the 392.

Axles and transfer case: when your use changes the answer

A Wrangler is the clearest case on this site of one truck with two schedules. In the Jeep manuals recorded on our year pages, the front and rear axle fluid (75W-90 synthetic gear oil; Dana 30 or 44 front, Dana 35 or 44 rear) has no routine change. Jeep inspects it at 20,000, 60,000, 100,000 and 140,000 miles. The change at 40,000, 80,000 and 120,000 miles is listed only for police, taxi, fleet, off-road or frequent trailer-towing use. If your Jeep is a trail rig, that second column is your schedule.

The transfer case works differently. Jeep inspects it at 30,000, 90,000 and 150,000 miles, and lists the change at 60,000 and 120,000 miles only for police, taxi, fleet or frequent trailer towing; off-road use is not on that list for the 3.6L. The 3.0L EcoDiesel's transfer case is changed at 120,000 miles, and the 6.4L 392's is drained and refilled every 30,000 miles.

Transmissions: one is serviced, one is "lifetime"

  • JK five-speed automatic (545RFE): fluid and filter at 120,000 miles, and at 60,000 miles for police, taxi, fleet or frequent trailer towing (Mopar ATF+4).
  • JL eight-speed automatic (ZF 850RE): Jeep's manual says routine fluid and filter changes are not required, and to change them only if the fluid becomes contaminated (with water, for example) or the transmission is taken apart. The fluid is Mopar ZF 8&9 Speed ATF, not ATF+4.
  • Six-speed manual: no change in normal driving; every 30,000 miles only under severe use such as towing, snow plowing, heavy loads, commercial use, off-road or desert driving, or sustained high speed in heat.

Plugs, coolant and brake fluid

  • 3.6L Pentastar spark plugs: 100,000 miles.
  • Coolant: Mopar OAT/HOAT coolant to specification MS-12106, first flush at 150,000 miles.
  • Brake fluid: Mopar DOT 3, every 36 months.
  • Air filter: every 30,000 miles, more often when driving in dust. The cabin air filter exists only on the JL, at 20,000 miles.

What is documented about steering, clutches and the 4xe

Owners talk about "death wobble". None of the NHTSA recall summaries below uses that term, but several concern steering and front-axle parts you will want checked on a 2018-2020 JL.

  • Steering and front axle, 2018-2020. Recall 18V675 (2018-2019) covers front track bar brackets that may be improperly welded and separate from the frame. Recall 18V343 (2018) covers an intermediate steering shaft that may split. Recall 19V201 (2019) covers a steering column stub shaft that may break. Recall 20V042 (2020) covers a lower control arm bracket weld that could let the arm separate from the axle.
  • Manual clutch, 2018-2023. Recalls 20V124, 21V028 and 23V116 cover a clutch pressure plate that may overheat and fracture; for the 2023 recall the remedy is a new clutch assembly and a software update.
  • EcoDiesel, 2020-2023. Recalls 22V767 and 23V263 cover a high-pressure fuel pump that may fail and stall the engine.
  • 4xe plug-in hybrid. Recalls 23V787, 24V720 and 25V741 cover a high-voltage battery that may fail internally and cause a fire. For 25V741 Jeep advised owners to park outside, away from structures, and not to charge until the repair is done. Recalls 22V865 and 25V766 cover an engine shutdown and debris inside the engine.

Frequently asked questions

Does a Jeep Wrangler need its axle fluid changed?

In the Jeep manuals recorded on our year pages, axle fluid is inspected, not routinely changed. The change at 40,000, 80,000 and 120,000 miles is listed only for police, taxi, fleet, off-road or frequent trailer-towing use.

Is the Wrangler's eight-speed automatic fluid lifetime fill?

On the JL with the ZF eight-speed, Jeep's manual says routine fluid and filter changes are not required, and to change them only if the fluid is contaminated or the transmission is disassembled. The earlier JK five-speed (545RFE) is different: fluid and filter at 120,000 miles.

How often do Wrangler spark plugs need replacing?

On the 3.6L Pentastar, every 100,000 miles in the Jeep manuals recorded on our year pages.

Sources

The documents behind the figures on this page.

Owner's manuals, maintenance guides and press releases

Recalls

This site's year data

Jeep Wrangler maintenance schedule by year